Egotiation, 5 auto-negotiation – Interlogix MC352-4P-2S User Manual

Page 26

- 26 -

The Industrial Gigabit PoE+ Switch performs "Store and Forward"; therefore, no error packets

occur. More reliably, it reduces the re-transmission rate. No packet loss will occur.

4.5 Auto-Negotiation

The STP ports on the Industrial Gigabit PoE+ Switch have built-in “Auto-negotiation”. This

technology automatically sets the best possible bandwidth when a connection is established with

another network device (usually at Power On or Reset). This is done by detecting the modes and

speeds at the second of both devices that are connected and capable of. Both 10Base-T and

100Base-TX devices can connect with the port in either Half- or Full-Duplex mode. 1000Base-T can

be only connected in Full-duplex mode.