Interlogix MC251-4P/1CXT - Manual (Page 9)

IFS MC251-4P/1CXT User Manual 5
LED Indicators
System
LED Color Function
P1 Green Light Indicates that power 1 is active.
P2 Green Light indicates that power 2 is active.
FAULT Green Light indicates that either power 1 or power 2 does
not have power.
VDSL/BNC
LED Color Function
Light Indicates that the VDSL link is established.
ACT Green
Blink
Indicates that the VDSL link is actively sending or
receiving data over that port.
Light Indicates that the VDSL link is established.
Fast
Blink Indicates that the VDSL link is at training status
(about 10 seconds).
Sync Green
Slow
Blink Indicates that the VDSL link is at idle status.
Master Green Light
Indicates that the VDSL Bridge is running in Master
mode.
Slave Green Light
Indicates that the VDSL Bridge is running in Slave
mode.
10/100Base-TX with PoE Port
LED Color Function
Light Indicates that the port is link up.
Blink
Indicates that the Converter is actively sending or
receiving data over that port. LNK/
ACT
Green
Off Indicates that the port is link down.
PoE
in-Use
Orange Light
Indicate the port is providing 48V DC in-line power.
(Ports 1-4).
Mode DIP Switch
The MC251-4P/1CXT provides 4 selective transmission
modes. By switching the transmission modes, you can obtain
a best transmission mode to suit the phone line quality or