Mounting installation, Mounting to a din-rail, Mounting installation 15 – Interlogix MC251-4P/1CXT User Manual

Page 19

Text mode
Original mode

IFS MC251-4P/1CXT User Manual 15

Mounting Installation

This section describes how to mount the MC251-4P/1CXT and
make connections to it. Please read the following sections and
perform the procedures in the order presented.

Note:

In the installation steps below, this Manual uses the IFS

GE-DSGH-8 8 Port Industrial Gigabit Switch as an example.
However, the steps for any IFS Industrial Switch & Industrial
Media Converters are similar.

Mounting to a DIN-Rail

The DIN-Rail kit comes assembled on the MC251-4P/1CXT
out of the box. Please refer to following figures to hang the
MC251-4P/1CXT on a DIN-Rail.

1. Lightly press down and push the bottom of the DIN-Rail

connector mount into the track.