Interlogix MC251-4P/1CXT - Manual (Page 10)

6 IFS MC251-4P/1CXT User Manual
distance of connectivity. The following is a summary table of
transmission settings, bandwidth and distance extensibility
tested for AWG 24 (0.5mm) twisted-pair without noise and
cross talk.
DIP-1 DIP-2 DIP-3 DIP-4
Mode Channel
Band
Plan
SNR
OFF Master Interleave Symm 9dB
ON
(default)
Slave Fast Asymm 6dB
Master / Slave
• Master (Central Office) – in Master device mode, usually
the Master device will be located at the data center of the
ISP or enterprise to link to the backbone. For IP video
applications, the Master (CO) setting should be used at the
IP camera for maximum bandwidth availability over
distance.
• Slave (Customer Premises Equipment) – the Slave device
mode, usually the Slave device will be located at thre
branch office, home or remote side as the long reach data
receiver. The Slave can also be connected to the network
devices such as a PC, VoIP, Wireless Access Point, etc.
When the MC251-4P/1CXT is operating in Slave mode, the
DIP switch 2, 3, and 4 are disabled.
Link Type
• BNC mode allows the MC251-4P/1CXT to connect and
data transfer by using BNC cable