Intellijel Atlantis - Manual (Page 8)

set frequency MODulation level
The Primary VCO section consists of a triangle-core VCO that produces pulse, saw, sine and sub waveforms. You can frequency modulate this section with MOD
bus, in EXPonential or LINear manner. The pulse WIDTH can be manually adjusted and modulated by triangle wave of MODulation bus, ENVelope or an EXTernal
signal. You can drive this VCO in 1V/OCT and adjust range with OCTAVE 6-positions switch and FINE knob.
All waveforms are routed to the MIX section.
Range : ~15Hz - 1000Hz
Overview
Primary VCO section - 01
set FINE frequency
set pulse WIDTH set Pulse Width Modulation
set OCTAVE range
Primary VCO OUTPUTS