Intellijel Atlantis - Manual (Page 54)

GATE signal
+8V
-8V
t
ON OFF
0/-8V range out
+8V
-8V
t
Attack Decay Sustain Release
The ENVELOPE section is an ADSR generator with two timing ranges (fast x1 and slow x10) selectable with a switch. This ADSR can be re-triggered with the TRIG
input. LEVEL input sets the ENVELOPE VCA level Envelope VCA level which means you can have control over ADSR global velocity.
Amplitude range : 8V (positive or negative).
The CYCLE switch sets the ENVELOPE in cycle mode, by this way the ADSR acts as an A, A/D, or D LFO/VCO, depending of the A/D/S/R settings.
Overview
ENVELOPE section - 01
set CYCLE mode
set ADSR range
set Attack (time) set Decay (time) set Sustain (voltage) set Release (time)
0/+8V range out
+8V
-8V
t
Attack Decay Sustain Release
re-TRIGger
signal
ADSR VCA
level input