Intellijel Atlantis - Manual (Page 21)

The MODulator section is a triangle-core LFO/VCO that produces sine, triangle, saw, square waveforms combined with noise and Sample&Hold generators. You
can frequency modulate this section at 1V/OCT over 8 octaves. The 6-positions knob selects the wave which is routed to the MOD bus. You can switch between
LFO and VCO range and then use Atlantis as a dual triangle-core VCO generator. Sample&Hold input is linked to the noise generator and can be clocked by an
external signal. The LINK switch allows to synchronise the frequency of the MODulator at a multiple of the Primary VCO core frequency.
LFO Range : ~0.01 Hz (100 sec.) - 200Hz (0.005 sec.)
VCO Range : ~1Hz (1 sec.) - 20 000Hz (audio)
Overview
MODulator section - 01
set MODulator bus TYPE
waveform
set LFO/VCO range
MODulator waves
OUTPUTS
S&H and NOISE
OUTPUTS
set frequency RATE
LINK to Primary VCO
frequency
set FINE frequency RATE