Intellijel Atlantis - Manual (Page 69)

The Voltage Controled Amplifier is the final stage of the Atlantis signal path. The input of this section is normaled to the VCF section out. You can set no, soft or
hard clip for signal amplification to get more abrasive sounds. The ENV/GATE switch selects the source of the control voltage that open the VCA, between the
positive ENVelope section out and GATE signal (from GATE input or with manual button).
Output range : 10Vpp.
Overview
VCA section - 01
manual GATE switch
CLIP indicator
MAIN OUT
10Vpp
set VCA drive
select VCA
amplification CV source