ILY CFast/HDD Duplicator - Manual (Page 9)

SATA HDD Duplicate Controller Manual
Once the scan is complete, the LCD will display the corresponding results
PreScan OK!
Attention: This is Function 3 of 1-1 HDD DUPLICATOR.
3.6 ReScan Bus
Choose option 6 from the menu:
6. ReScan BUS
Press ENT to re-scan hardware. The LCD will display the following info.
Re-Scan BUS NOW?
Yes
When the scan is complete the LCD will display the following info.
Bus re- scan OK!
Attention: This is Function 4 of 1-1 HDD DUPLICATOR.
3.7 Source Size
Source Size is used to show the capacity message of the source hard disk.
Choose option 7 from the menu:
7. Source Size
Press ENT and the LCD will show the following info.
HDD:Hitachi
Size:232.9GB
Then press ENT and the LCD will show the data's size info.
HDD:Hitachi
Data:200.9GB
Attention: This is Function 5 of 1-1 HDD DUPLICATOR.
3.8 Secure Erase
Secure Erase is used to do data-erase operations to the hard drive by command order from HDD
itself. This function will erase all HDD with 00 character in the tray (included Source tray), please
be careful when use it.
Choose option 8 from the menu:
8. Secure Erase
8