Ii. function introduction – ILY All-in-One Duplicator User Manual
Page 36

II. Function Introduction
**Note:
Skip Read Error can not fix the error in the source disc, all it does
is skipping the errors and keeps copying the rest of readable data.
•
Change Bad Master: This setting will make the system eject bad
source disc and ask for another one while the source disc is
unreadable by the system.
•
CD Overburn: The majority of discs have a small margin of extra
groove at the outer edge. This setting allows you to copy data
over the normal size limit.
•
Show HDD Image Name: You can select to show HDD image
name or capacity on Copy, Test, Copy + Compare and Compare
function
Show HDD Image Name:
Show capacity:
**Note:
When you change the source from drive to HDD, the LCD
will show the HDD information. To change your source reader
please refer to 6. Select Source.
•
Keep Buffer: You can set Yes to load source disc to buffer in first
round of Copy, Test, Compare or Copy+Compare and do it again
without the source disc. Or set No to keep buffer not be used.
**Note:
The source will be only temporary saved in buffer, there will be nothing
left when you exit the task (Copy, Test, Compare and Copy+Compare)
or reboot the system.
•
Boot Password: This setting allows you to enable or disable the
user administrative password. Users have to login when the
system is booted on.
•
Setup Password: You can set up password by pressing
to
select
the number you like and press
to set next number.
36