Ii. function introduction, 3. multidisc – ILY All-in-One Duplicator User Manual
Page 18

II. Function Introduction
2. Select 2.Disc Spanning and press
.
3. Use
/
to enable or disable the copy function.
** Note:
Disc spanning can not be executed with Multidisc mode at the
same time. When both modes are enabled, the system will primary
execute disc spanning.
6-3. MultiDisc
The MultiDisc copy mode allows you to duplicate multiple discs from
one Flash device. You can enable or disable this mode here.
1. Select 6.Setup and press
.
2. Select 3.MultiDisc and press
.
3 Use
/
to enable or disable the copy function.
18