ILY All-in-One Duplicator - Manual (Page 33)

II. Function Introduction
3. The system will detect the update file and execute update task
automatically.
4. Once the update job has done, the system will require you to reboot the
system.
**Note:
DO NOT save the firmware in a folder. The system can not detect
the firmware if you save it in a folder.
8. Setup
8-1. Auto Start Time
This setting will allow the system to do the Copy, Test, Compare and Copy
+ Compare functions automatically in a few seconds once the source and
blank discs are placed in the trays and detected by the system. The default
setting is 5 seconds. You can set a longer/shorter time from 1 to 99 seconds
or set OFF to disable this function and execute copy task manually.
1. Pressing / to select 8.Setup and sub menu 1.Auto Start Time.
33