ILY All-in-One Duplicator - Manual (Page 16)

II. Function Introduction
1. Select 4.Information and press .
2. Select 3.System Info. and press to check the system’s information.
3. The system information will show on the LCD.
5. Utility
This function will update the firmware of this system by using certified update
firmware which released by manufacturer.
1. Apply for the firmware from your local distributor.
2. Unzip the firmware and save it in a USB drive.
**Note
DO NOT save the firmware in a folder. The system can not detect
the firmware if you save it in a folder.
3. Select 5.Utility and press .
4. The system will start to execute updating task.
16