IC Realtime 23x Mini PTZ Dome Camera User Manual
Page 21
15
POWER UP
：AUTO
PARAMTER ：OFF
BACK EXIT
z
BACK: Go back to the previous menu.
z
EXIT: Log out the system menu.
Privacy Mask
Move the cursor to PRIVACY MASK and click confirm button, system goes to privacy mask setup
interface.
Note:
z
For security reasons, please set privacy zone a little bit larger than the privacy object size.
z
Each time, after modifications you need to move the cursor to SAVE button and then click confirm
button to get all setup activated. Otherwise, privacy zone may not move correspondingly with the
object.
Please enter privacy mask menu, now all the privacy zones are closed.
Move the cursor to PRIVACY NO, please use left/right key to set different privacy zones.
For example, shift to 001 section and then move the cursor to ACTIVATE.
Secondly, click OK button to go to the setup interface. Now there is a privacy zone in the screen centre.
Thirdly, use PTZ to move camera so that privacy object fit well with screen centre.
Fourthly, move the cursor to RESIZE and then click left and right key to adjust privacy zone direction
and size.
Fifthly, move the cursor to SAVE and then click confirm button to exit.
z
PRIVACY
NO
：Here is to set privacy mask zones. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
z
ACTIVATE: There are two settings: on and off. When activate function is on, the privacy mask
function will be activated and displays in the screen. When activate function is off, the privacy mask
function will be closed and the blank will not displayed in the screen.
z
RESIZE
：It is to adjust the privacy zone size. Move the cursor to current item and use the left/right
button on the keyboard or in the speed dome terminal menu to set .Please continue pressing
direction button to widen or narrow zone size. ← is to narrow the horizontal width and → is to widen
the horizontal width. ↑ is to widen vertical height and ↓ is to narrow the vertical height.
z
SAVE
：Here is to save user setup.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
Power Up
Move the cursor to the POWER UP item and then click the confirm button, you can go to the fourth
menu.
z
POWER UP: It is to
set the PTZ operation
when the speed
dome boots up. The
PRIVACY NO : 1
ACTIVATE : OFF
SETTING
BACK EXIT
RESIZE : 1
SAVE
BACK EXIT