IC Realtime 540TVL 23x High Speed PTZ Camera with 250' IR User Manual
Page 24
17
z
SCAN
NO
：Here is to set auto scan number. The value ranges from 1 to 5. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
SET LEFT LIMIT
：Here is to set camera left address. Click confirm button to save current setup.
z
SET
RIGHT
LIMIT
：Here is to set camera right address. Click confirm button to save current setup.
z
SCAN SPEED: The value ranges from 1 to 255. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
z
RUN: Please input auto scan number first, and then please move the cursor to RUN and click confirm
button to activate auto scan function.
z
STOP: Here is to terminate auto scan function.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4.4 Cruise (Touring)
Move the cursor to highlight CRUISE item and then click confirm button to go to set interface.
z
CRUISE
NO
：Here is to ser tour number. The value ranges from 1 to 8. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
z
CRUISE SETTING: Move the cursor to cruise setting item and then click confirm button. You can see
the following interface. Here you can add or remove the preset, and set the corresponding dwell time
and call speed. One cruise can max include 32 presets. The preset value ranges from 0 to 255.
DWELL: Here is t set dwell time. The value ranges from 3s to 255s. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
SPEED: The speed value ranges from 1 to 16.
When you move the cursor to one cruise number, you can use left/right button to turn the page. There are 8
cruises in each page and there are total 4 pages.
When you move the cursor to one cruise number, please click confirm button to set the cruise. Please use
up/down button to set preset number, dwell time and speed. Use the left/right button to go to the next cruise.
Click confirm button you can exit the setup. After you completed the setup, move the cursor to back button
to go to the previous interface.
CRUISE NO： : 001
CRUISE SETTING
DELETE CRUISE
RUN
STOP
BACK
EXIT
NO PRESET DWELL SPEED
01 000 005 013
02 000 005 013
03 000 005 013
… … … …
32 000 005 013