IC Realtime 540TVL 23x High Speed PTZ Camera with 250' IR User Manual
Page 21
14
DAY/NIGHT ：AUTO
SENSITIVITY :4
SAVE
BACK
EXIT
PICTURE FLIP
：ON/OFF
FREEZE FUNCTION
：ON/OFF
FOCUS SENSITIVITY : DEFAULT/LOW
STABILIZATION : ON/OFF
CAMERA FACTORY DEFAULT
CAMERA RESTATRT
BACK
EXIT
o
SLOW SHUTTER LOW LIMIT: It is to set the camera slow shutter. If the shutter time is too
long, it may affect the video real-time feature.
o
NOISE REDUCTION: There may be noise when the camera is monitoring the low
illumination environments. You can use the digital filter to process the noise to guarantee
the clear video.
o
3D NOISE REDUCTION: System can reduce the noise according to the previous frames
and current frame. It has the sound noise reduction function but it may affect the video real-
time feature.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.3.3 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu.
z
DAY/NIGHT: There are four options: IR auto/auto/black and white/color. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
z
SENSITIVITY: It is the threshold value when the system switches from the black and white to the color
in the auto mode.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.3.4 Next Page
Move the cursor to NEXT PAGE and then click confirm button, you can go to the submenu.
z
PICTURE FLIP: This function allows you to turn the image rotation 180 degrees. There are two options:
on/off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
FREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
FOCUS SENSITIVITY: It is the auto focus sensitivity.
z
STABALIZATION: It is to remove the risk of the video vibration resulting from the speed dome
movement.
z
CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm
button to restore factory default setup.
z
CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.