Functions and operation – IC Realtime 690HTVL I-Sniper PIXIM DPS WideLux IR Bullet Camera (EL2000) User Manual
Page 9

16
17
8. Functions and operation
8. Functions and operation
ECLIPSE MASKING AREA
ECLIPSE ON
ECLIPSE OFF
AREA SETTING
ALL AREA SET
MASK COLOR
ECLPS LEVEL
1
GAIN CONTORL
SAVE
OFF
GRAY
OFF
8-7. White Balance (WHITE BAL)
8-8. 2D-DNR (2D Noise Reduction)
8-9. 3D-DNR (3D Noise Reduction)
8-10. EFFECTS
-ECLIPSE: Can mask the head lights to view car
license number plate more clearly.
Can select masking color.
Adjust the ECLIPS level at the
GAIN CONTROL as OFF mode.
This is useful to optimize the white balalnce control under a certain artificial lighting
area where a standard white balance condition is not suitable.
- ATW (Auto Tracking White Balance)
This mode can be used within the color
GGGGGGGGGGXS\WWȋr¥XXSWWWȋrUG
GGGGGGGOGkP
- COL-ROLL
Anti color rolling mode.
Use it only when the rolling is severely shown.
- MANUAL
Recommanded to use it when the light
temperature is fixed all the time
GGGGGGGzGpukvvyGGv|{kvvyGU
- PUSH (Push lock)
Use this when the White Balance is deviated.
Face the camera toward the white wall or white
paper and press the Tact SW
ත Note
· White Balance may not work properly under the following condition
- When the color temperature of the environment surrounding the subject is out of
the control range.(e.g. clear sky or sunset)
- When the ambient illumination of the subject is dim.
- If the camera is directed towards a fluorescent light or is installed in a place
where illumination change dramatically, the White Balance operation may become
unstable.
1. LENS
2. EXPOSURE
3. DAY/NIGHT
4. WDR/BLC/ECLPS
5. WHITE B AL
6. 2D-DNR
7. 3D-DNR
8. EFFECTS
9. SPECIAL
10. EXIT
DC IRIS
AUTO1
ECLPS
ATW
DISABLED
ON
RET
COLOR TEMP
RED
BLUE
INITIAL SET
SAVE
INDOOR
0
0
- LOW
TGtpkksl
- HIGH
TGkpzhislkaGkGYkuyUGuGG
not reduced.
TGvmmGaGhGYkuyOsGaGWPUG
Noise is not reduced.
ත Note
ciGGeGGGG GGcYkTkuyGkpzhislkeGGU
1. LENS
2. EXPOSURE
3. DAY/NIGHT
4. WDR/BLC/ECLPS
5. WHITE B AL
6. 2D-DNR
7. 3D-DNR
8. EFFECTS
9. SPECIAL
10. EXIT
DC IRIS
AUTO1
ECLPS
ATW
DISABLED
ON
RET
The background noise in the low light level decreases
automatically as the level of gain changes.
GGGGTGkuyGsl}ls
Adjust the noise reduction level.
GGGGTGklz{puh{pvu
GGGGGGGhGGZkuyGU
GGGGTGnsvihsGtv}ltlu{
Control ghost phenomenon
1. LENS
2. EXPOSURE
3. DAY/NIGHT
4. WDR/BLC/ECLPS
5. WHITE B AL
6. 2D-DNR
7. 3D-DNR
8. EFFECTS
9. SPECIAL
10. EXIT
DC IRIS
AUTO1
ECLPS
ATW
DISABLED
ON
RET
TGkTvvtGaGGGGGG¡U
·GvvtGaGXG¥G_UZW
·GkvvtGwhuGaGTXWWG¥GXWW
·GkvvtG{ps{GaGTXWWG¥GXWW
TGpthnlGmylllGaGGGGGGGU
TGkTlmmlj{
·G}TmspwGaGGGGGG GGGU
·GtpyyvyGaGGGGGG¡ GGGU
·Gyv{h{lGaGGGGGG GGGU
TGjvu{yhz{GaGWG¥GXWW
TGzohywulzzGaGWG¥GXWW
<3D-DNR MENU>
DNR LEVEL
DESTINATION
GLOB AL MOVEMENT
SAVE
24
47
OFF
1. LENS
2. EXPOSURE
3. DAY/NIGHT
4. WDR/BLC/ECLPS
5. WHITE B AL
6. 2D-DNR
7. 3D-DNR
8. EFFECTS
9. SPECIAL
10. EXIT
DC IRIS
AUTO1
ECLPS
ATW
DISABLED
ON
RET