IC Realtime 1080P (Full HD over coax) HD-SDI / HDcctv 20x Optical PTZ / IR User Manual
Page 24
17
PRESET
PAN
AUTO SCAN
AUTO CRUISE
AUTO PATTERN
IDLE FUNCTION
PRIVACY MASKING
NEXT PAGE
BACK
EXIT
PRESET NO ：001
TITLE ：PRESET001
SETTING
CALL
BACK
EXIT
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4 Function
Setting
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You can
see the above interface.
z
PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu.
z
PAN: It is to set the speed dome rotation speed. Move the cursor to PAN and then click confirm button
to go to the third submenu.
z
AUTO SCAN: It is to set the speed dome scan number and scan speed. Move the cursor to SCAN and
then click confirm button to go to the third submenu.
z
AUTO CRUISE: It is to set the cruise (tour) number and task. Move the cursor to AUTO CRUISE and
then click confirm button to go to the third submenu.
z
AUTO PATTERN: It is to set the pattern number and etc. Move the cursor to PATTERN and then click
confirm button to go to the third submenu.
z
IDLE FUNCTION: It is to set the idle movement and idle time. Move the cursor to IDLE FUNCTION and
then click confirm button to go to the third submenu.
z
PRIVACY MASKING: Move the cursor to PRIVACY MASKING and then click confirm button to go to the
third submenu.
z
NEXT PAGE: It includes PTZ speed, set zero, power up, menu idle, PTZ auto stop, and heater. Move
the cursor to the item and then click the confirm button to set. .Click the confirm button to view rest
setting items.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4.1 Preset Setup
Move the cursor to PRESET button and then click confirm button to go to set interface.
z
PRESET NO: Please use left/right key to modify preset number. The value ranges from 1 to 255.