IC Realtime 1080P (Full HD over coax) HD-SDI / HDcctv 20x Optical PTZ / IR User Manual
Page 21
14
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.
z
WHITE BALANCE SETUP: It is to set the camera white balance mode. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
z
EXPOSURE SETTING: It is to set the camera exposure mode, gain and etc. Move the cursor to current
option and then click confirm button, you can go to the third menu.
z
DAY/NIGHT: Set day/night mode. There are four options: IR auto/black and white/color/auto. Please
use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
FOCUS MODE: There are two modes: Manual/Auto. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
z
FOCUS LIMIT: It is to set the distance between the camera and the object. It can prevent the focus
distance is too small which may result in focusing on the enclosure. At the same time, you can change
the distance to change the focus speed.
z
PICTURE OUTPUT MODE: It is to set picture hue, saturation, gamma and etc. Move the cursor to
current option and then click confirm button, you can go to the third menu.
z
ZOOM SPEED: It is to set zoom speed. The bigger the value is, the faster the speed is. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
z
DIGITAL ZOOM: There are two options: on/off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
APERTURE: It is to adjust the lens to achieve clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
APERTURE CTRL LEVEL: System can auto reduce the aperture to lower the video noise when it is in
low illumination environment. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z
NEXT PAGE: It includes the following options: picture flip, freeze function, focus sensitivity, stabilization,
camera factory default setup, camera restart. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set. Click the OK button; you can view the rest camera settings.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.3.1 White Balance Setup
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can go to the submenu.
z
WHITE BALANCE MODE: Set white balance adjustment mode. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
4.4.3.2 Exposure Setting
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS MODE :AUTO
FOCUS LIMIT : 30CM
PIC OUTPUT MODE
ZOOM SPEED : 08
DIGITAL ZOOM : OFF
APERTURE : 09
APERTURE CTRL LEVEL: 9
NEXT PAGE
BACK
EXIT
WB MODE ： AUTO