Indicator lights – HONDA 2001 CR-V - Owner's Manual User Manual
Page 58
Indicator Lights
The instrument panel has many
indicators to give you important
information about your vehicle.
The U.S. instrument panel is
shown. Differences for the Canadian
models are noted in the text.
Low Oil Pressure
Indicator
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
Charging System
Indicator
If this light comes on when the
engine is running, the battery is not
being charged. For complete
.
Malfunction Indicator
Lamp
.
Parking Brake and
Brake System
Indicator
This light has two functions:
1. This indicator comes on when you
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
2. If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
Supplemental Restraint
System Indicator
This indicator lights when you turn
the ignition switch ON (II). If it
comes on at any other time, it
indicates a problem in the
supplemental restraint system. For
complete information, see page
.
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Instruments and Controls
SRS
U.S.
Canada
BRAKE
Main Menu
Main Menu
Table of Contents