beautypg.com

Fuses – HONDA 2001 CR-V - Owner's Manual User Manual

Page 290

background image

Fuses

Checking and Replacing Fuses

If something electrical in your

vehicle stops working, the first thing

you should check for is a blown fuse.

Determine from the chart on pages

271

and

272

, or the diagram on the

fuse box lid, which fuse or fuses

control that component. Check those

fuses first, but check all the fuses

before deciding that a blown fuse is

not the cause. Replace any blown

fuses and check the component's

operation.

1. Turn the ignition switch to LOCK

(0). Make sure the headlights and

all other accessories are off.

2. Remove the cover from the fuse

box.

BLOWN

3. Check each of the large fuses in

the under-hood fuse box by

looking through the top at the wire

inside. Removing these fuses

requires a Phillips-head screw-

driver.

FUSEPULLER

4. Check the smaller fuses in the

under-hood fuse box and all the

fuses in the interior fuse box by

pulling out each fuse with the fuse

puller provided in the door of the

interior fuse box.

Taking Care of the Unexpected

Main Menu

Main Menu

Table of Contents