beautypg.com

Lights – HONDA 2001 CR-V - Owner's Manual User Manual

Page 252

background image

Lights

3. Pull the inner fender cover back.

4. Remove the socket from the

headlight assembly by turning it

one-quarter turn counterclockwise.

5. To remove the turn signal/side

marker bulb, push it in slightly and

turn it counterclockwise. To

remove the parking light bulb, pull

it straight out of its socket.

6. Install the new bulb into the

socket.

7. Insert the socket back into the

headlight assembly. Turn it

clockwise to lock it in place.

8. Test the lights to make sure the

new bulb is working.

9. Put the inner fender cover in place.

Install the fastener and push on

the center until it locks (the center

is flush with the head).

Replacing Rear Bulbs

1. Open the tailgate. Remove the

three screws and remove the rear

light assembly from the rear pillar.

2. Determine which of the three

bulbs is burned out: stop/taillight,

turn signal light or back-up light.

Maintenance

Main Menu

Main Menu

Table of Contents