beautypg.com

Lights – HONDA 2001 CR-V - Owner's Manual User Manual

Page 253

background image

Lights

3. Remove the socket by turning it

one-quarter turn counterclockwise.

4. Remove the bulb from the socket

by pulling it straight out.

5. Install the new bulb in the socket.

6. Reinstall the socket. Turn it clock-

wise until it locks.

7. Test the lights to make sure the

new bulb is working.

8. Reinstall the rear light assembly

into the rear pillar. Reinstall the

three screws and tighten them

securely.

Replacing a Rear License Plate

Bulb

1. Remove the cover by carefully

prying on the edge of the cover in

the middle with a small flat-tip

screwdriver.

2. Remove the socket from the light

assembly by turning it one-quarter

turn counterclockwise.

CONTINUED

Maintenance

Main Menu

Main Menu

Table of Contents