beautypg.com

Cooling system – HONDA 2001 CR-V - Owner's Manual User Manual

Page 222

background image

Cooling System

RESERVE TANK CAP

HOLDER

RESERVE TANK

5. Remove the reserve tank from its

holder by pulling it straight up.

Drain the coolant, then put the

tank back in its holder.

6. When the coolant stops draining,

tighten the drain plug at the

bottom of the radiator.

Apply non-hardening sealant to the

drain bolt threads, put a new

washer on the drain bolt, and

reinstall the bolt in the engine

block. Tighten it securely.

Tightening torque:

61 lbf.ft (83 N.m,8.5 kgf.tn)

7. Mix the recommended antifreeze

with an equal amount of purified

or distilled water in a clean

container. The cooling system

capacity is:

Automatic Transmission:

1.03 US gal (3.9 l, 0.86 Imp gal)

Manual Transmission:

1.06 US gal (4.0 l, 0.88 Imp gal)

FILLER NECK

Fill up to here

8. Pour coolant into the radiator up

to the base of the filler neck.

Maintenance

Main Menu

Main Menu

Table of Contents