beautypg.com

Lights – HONDA 2001 Accord Sedan - Owner's Manual User Manual

Page 282

background image

Lights

Replacing Rear Bulbs

(in Fenders)

1. Open the trunk.

Remove the fastener from the side

of the trunk lining by turning it

counterclockwise with a coin. Pull

the lining back.

2. Determine which of the two bulbs

is burned out: stop/taillight or turn

signal.

3. Remove the socket by turning it

one-quarter turn counterclockwise.

4. Pull the bulb straight out of its

socket.

Push the new bulb straight into

the socket until it bottoms.

5. Reinstall the socket into the light

assembly by turning it clockwise

until it locks.

6. Test the lights to make sure the

new bulb is working.

7. Reinstall the trunk lining. Make

sure it is installed under the edge

of the trunk seal.

8. Put the fastener in the hole on the

side of the trunk lining and push

on the center until it locks (the

center is flush with the head).

Maintenance

FASTENER

Main Menu

Main Menu

Main Menu

Main Menu

Table of Contents