beautypg.com

Changing a flat tire – HONDA 2001 Accord Sedan - Owner's Manual User Manual

Page 302

background image

Changing a Flat Tire

9. Locate the jacking point nearest

the tire you need to change. It is

pointed to by an arrow molded into

the underside of the body. Place

the jack under the jacking point.

Turn the end bracket clockwise

until the top of the jack contacts

the jacking point. Make sure the

jacking point tab is resting in the

jack notch.

10. Use the extension and wheel

wrench as shown to raise the

vehicle until the flat tire is off the

ground.

DX and LX models:

Do not attempt to forcibly pry the

wheel cover off with a screwdriver

or other tool. The wheel cover

cannot be removed without first

removing the wheel nuts.

11. Remove the wheel nuts and flat

tire. Temporarily place the flat tire

on the ground with the outside

surface of the wheel facing up.

Placing the wheel face down could

mar its finish.

CONTINUED

Taking Care of the Unexpected

JACKING POINT

EXTENSION

WHEEL WRENCH

Main Menu

Main Menu

Main Menu

Main Menu

Table of Contents