beautypg.com

Service station procedures – HONDA 2001 Accord Sedan - Owner's Manual User Manual

Page 184

background image

Service Station Procedures

4-cylinder models

3. Pull the support rod out of its clip

and insert the end into the hole on

the front of the hood around the

center.

To close the hood, lift it up slightly to

remove the support rod from the

hole. Put the support rod back into

its holding clip. Lower the hood to

about a foot (30 cm) above the

fender, then let it drop.

After closing the hood, make sure it

is securely latched.

6-cylinder models

3. Lift the hood up most of the way.

The hydraulic supports will lift it

up the rest of the way and hold it

up.

CONTINUED

Before Driving

SUPPORT ROD

Main Menu

Main Menu

Main Menu

Main Menu

Table of Contents