HONDA 2001 Accord Sedan - Owner's Manual - Manual (Page 117)

Heating and Cooling
To Cool with A/C
1. Turn on the A/C by pressing the
button. The light above the button
should come on when a fan speed
is selected.
2. Make sure the temperature
control dial is set to maximum cool.
3. Select
4. If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
5. Set the fan to the desired speed.
If the interior is very warm from
being parked in the sun, you can cool
it down more rapidly by setting up
the controls this way:
1. Start the engine.
2. Turn on the A/C by pressing the
button. Make sure the tempera-
ture control dial is set to maximum
cool.
3. Set the fan to maximum speed.
4. Open the windows partially. Select
and Fresh Air mode.
When the interior has cooled down
to a more comfortable temperature,
close the windows and set the
controls as described for normal
cooling.
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
58 ) when driving in stop-and-go
traffic or climbing a long, steep hill.
If it moves near the red zone, turn
off the A/C until the gauge reads
normally.
Comfort and Convenience Features
FAN CONTROL DIAL MODE BUTTONS TEMPERATURE
CONTROL DIAL
AIR CONDITIONING BUTTON RECIRCULATION BUTTON
Main Menu Main Menu Main Menu
Main Menu Table of Contents