HONDA 2001 Accord Sedan - Owner's Manual - Manual (Page 141)

Audio System
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the Preset buttons.
TUNE — Use the TUNE knob to
tune the radio to a desired frequency.
Turn the knob clockwise to tune to a
higher frequency, or
counterclockwise to tune to a lower
frequency.
To change the frequency rapidly,
press and hold the top or bottom of
the SEEK bar. Release the bar when
the display reaches the desired
frequency. Depending on which part
of the bar you press, the system
scans upward or downward from the
current frequency.
SEEK — The SEEK function
searches the band for a station with
a strong signal. To activate it, press
and release the top or bottom of the
SEEK bar. Depending on which part
of the bar you press, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
SCAN — The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. The system will scan
up the band for a station with a
strong signal. When it finds one, it
will stop and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Comfort and Convenience Features
Main Menu Main Menu Main Menu
Main Menu Table of Contents