By go home 1 or 2, Navigation system manual, Entering a destination – HONDA 2013 Pilot - Navigation Manual User Manual
Page 51

Navigation System
51
If desired, rotate the Interface Dial 
knob to change the map scale. When 
you have the crosshairs on the desired 
icon, polygon, or road, push in on the 
Interface Dial. The address of the 
location you have selected will appear at 
the top of the screen.
NOTE:
Information icons are displayed at 
scales from 1 mile to 1/4 mile, POI icons 
are displayed at 1/8 mile or less, and 
roads are displayed at 1/4 mile or less.
If this is the desired address, push in on 
the Interface Dial again. If not, use the 
Interface Dial to reposition the 
crosshairs, then push in on the 
Interface Dial again to display the new 
address.
If you selected a single icon or road 
segment, select Set as Dest. to 
calculate a route to the selected 
destination. If you selected multiple 
icons within the cursor radius, select an 
item from the list. Then select OK to 
calculate a route to the selected 
destination.
By Go Home 1 or 2
Selecting Go Home 1 or 2 from the
DEST
screen (
Dest. MENU 1
or
2
)
takes you to the address you have set as 
“home.”
If a Go Home 1 or 2 PIN has been set, 
the system prompts you to enter your 
PIN.
Say or enter your PIN. The system will 
then display the 
Calculate route to
screen (see Driving to Your Destination 
on 
If a Go Home 1 or 2 PIN has not been 
set, the system displays the 
Calculate
route to
screen after you select Go
Home 1 or 2 (see Driving to Your 
Destination on 
).
NOTE:
• To edit Home Address, see Home 
Address on
• When no Home Address 1 or 2 has
been set, the
SETUP
screen will be
displayed. For details, see Home 
Address on 
• Prior to departure, you can set areas
to avoid. The system then includes 
them in its calculations for the 
destination you have entered. See 
Edit Avoid Area on 
• PINs are optional. If you choose to
use a PIN, make sure you remember 
it. If you forget your PIN, your dealer 
will have to reset it for you, and all 
PINs will be cleared.
• If a PIN is desired, enter it using the
Personal preference PIN number 
feature in SETUP. See 
for
information on entering your PIN 
number.
2013 Pilot
Intro
Index
Home
SEC
Entering a Destination
Navigation System Manual
