beautypg.com

Great Planes Yak-54 3D Indoor EP ARF - GPMA1131 User Manual

Page 8

background image

8

o 

6. Place the base section of jig piece 2 under the wing, and

place base jig piece 6 under the horizontal stabilizer. Slide
the corresponding top sections over the fuse, as pictured.

o 

7. Glue the two fuselage pieces together by gently sliding

the vertical fuselage and applying foam safe CA glue to the
seam between the two fuselage pieces. Be very careful when
gluing around the jig pieces.

DO NOT glue the jig pieces to

the fuselage. Apply some foam safe accelerator to the seam,
and allow a few moments for the glue to cure.

o 

8. Apply a thin bead of foam safe CA glue to the

opposite side of the fuselage, and to the seam behind the
wing. Activate this CA and allow a few moments for the
glue to cure.

o 

9. Once the glue has cured, gently turn the Yak over and

apply glue to the underside fuselage seams.