beautypg.com

Great Planes Super Stearman EP ARF - GPMA1150 User Manual

Page 9

background image

9

2. Temporarily bolt the wing to the fuselage with two 4-40

x 1" [25mm] bolts and #4 fl at washers.

3. Slide the wire elevator joiner into the stab opening

4. Slide the stab into the stab opening making sure the

wire stays in the opening.

5. Make sure the stab aligns with the wing. If it does not,

lightly sand the stab saddle.

6. Temporarily install the rudder into the opening in the stab.

7. Measure the distance from the tips of the stab to the tips

of the wing. Adjust the stab until they are equal.

8. Carefully remove the fi n and rudder, making sure you

do not disturb the stab. Wick CA glue into the joint, securing
the stab to the fuselage. Allow the glue to cure.