Great Planes Spirit Elite 2-Meter Sailplane Kit - GPMA0535 - Manual (Page 25)

25
MONOKOTE OR
STRONG TAPE HINGE
Use a triangle to align the
fin 90
o to the stab. Glue in
place with epoxy.
Position the fin so it is straight with the
fuselage. Remove the covering where
the fin rests on the fuselage.
Install the flaps and
ailerons with MonoKote
or strong tape hinge.
Step 20 Step 19
# 2 X 3/8" [9.5mm]
FLAT HEAD SCREWS
Cut servo blocks from the 3/16" x 3/8" x 2"
[4.8mm x 9.5mm x 50.8mm] basswood.
Drill small pilot
holes for the
servo screws.
Drill pilot holes
for the screws.
Install the servos
to the blocks.
Cover the hatch
with Monokote.
Glue in place
with Medium
CA or epoxy.
Step 22 Step 21
A=A A A
A A
A=A
Step 18
Align the stabilizer so that it is parallel
with the wing.
When satisfied with the fit,
glue in place with epoxy.