Great Planes Spirit Elite 2-Meter Sailplane Kit - GPMA0535 - Manual (Page 14)

14
1/16" X 3" X 24"
[1.6mm X 76mm X 610mm]
BALSA SHEET
W20 1/16" [1.6mm]
PLY HATCH
Step 17
Use the ply hatch as a
template for cutting the
hole for the flap servo.
Cut from 1/16" X 3" X 24"
[1.6mm X 76mm X 610mm]
BALSA SHEET
Step 18
Step 19
Remove the wing from the
table. Cut off the jig tabs
and sand smooth.
Step 20
Wrap the fiberglass cloth tightly around the joiner
box and glue it in place. Cut off any excess.
1/16" X 3" X 24"
[1.6mm X 76mm X 610mm]
BALSA SHEET
Step 21
Glue the top sheeting in place.
1/16" X 3/8" X 42"
[1.6mm X 9.5mm X 1067mm]
BALSA SHEETING
Medium Medium
Thin
Medium
or
aliphatic
wood
glue
The cloth will cause the
sheeting to bulge. sand the
sheeting to compensate.