Great Planes Gee Bee R-1 EP Rx-R - GPMA6020 - Manual (Page 9)

9
INSTALLATION OF THE FLYING WIRES
(Optional)
❏ ❏
1. Insert the elastic thread through the forward hole in
the right wing and through the forward hole in the right outer
wheel pant.
❏ ❏
2. Apply a drop of medium CA to the end of the elastic
thread and pull the thread into the wheel pant so that the end
of the thread is fl ush with the inside of the wheel pant. Wipe
off any excess CA and spray the CA with Activator.
❏ ❏
3. Reattach the outer wheel pant to the inner wheel pant.
Extend the elastic thread to the fuselage. Do not stretch the
elastic. Cut the elastic thread, allowing a few inches extra for
securing the thread inside the fuselage.
❏ ❏
4. Remove the thread from the wing and insert the elastic
thread through the forward hole of the spreader bar, through
the wing and through a second spreader bar. The forward end
of the spreader bar is the more rounded end.
❏ ❏
5. Insert the elastic thread in the forward hole of the
fuselage.