Great Planes de Havilland Tiger Moth EP ARF - GPMA1134 - Manual (Page 3)

3
ADDITIONAL ITEMS REQUIRED
This is a partial list of items required to fi nish the Tiger Moth
that are illustrated in the instruction manual. Order numbers
are provided in parentheses.
Motor, Battery, ESC Recommendations
❍
Great Planes ® RimFire 250 (28-13-1750) Outrunner
motor (GPMG4502)
❍ Great Planes ElectriFly 2S (7.4V) 300mAh 20C
Competition BP LiPo battery (GPMP0700)
❍
Great Planes ElectriFly SS-8 8 Amp Brushless ESC
(electronic speed control) (GPMM1800)
❍ Great Planes 8 x 6 Power Flow Slo-Flyer electric
propeller (GPMQ6610, qty. 2)
Radio Equipment
❍ Minimum 3-channel radio control system
❍
Two ES40 Pico micro servos (GPMM1200)
❍
Mini/micro receiver (Futaba ® R6004FF – FUTL7624)
Adhesive & Building Supplies
Other than common hobby tools, this is the list of
Adhesives and Building Supplies that were used to finish
the Tiger Moth.
❍
Thin foam-safe CA (HOTR1040)
❍
Medium foam-safe CA (HOTR1050)
❍ CA applicator tips (GPMR6033)
❍
CA accelerator (GPMR6035)
❍
Great Planes Pro Threadlocker (GPMR6060)
❍
#60 to #55 (.040" to .052") [1.0mm to 1.3mm] drill bit
❍ Spare Propeller Saver O-rings (GPMG1405)
❍
Optional: J&Z R/C 56 (or household white glue)
❍
Optional: 3/4" fi ber-reinforced tape (for reinforcing
wings, see page 4)
KIT INSPECTION
Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of
acceptable quality, or if you need assistance with assembly,
contact Product Support.
Great Planes Ph: (217) 398-8970, ext. 5
Product Support Fax: (217) 398-7721
3002 N Apollo Drive, Suite 1
Champaign, IL 61822
E-mail: [email protected]
KIT CONTENTS
1 Fuselage
2 Bottom Wing
3 Top Wing
4 Horizontal Stabilizer (Stab)
5 Vertical Stabilizer (Fin)
6 Pilots
7 Cowl
8 Main Landing Gear
9 Outer Wing Struts
10 Cabanes
11 Hook and Loop Material
12 Landing Gear Struts
1
6
2
4
9
10
11
12
8
7
3
5