Great Planes Ultimate Biplane 40 Kit - GPMA0240 - Manual (Page 4)

These are the building tools that are required. We
recommend Great Planes Pro" CA and Epoxy glue.
D 2 oz. Pro CA (Thin, GPMR6003)
D 2 oz Pro CA+ (Medium, GPMR6009)
D 1 oz Pro CA- (Thick, GPMR6014)
D 6-Minute Pro Epoxy (GPMR6045)
D 30-Minute Pro Epoxy (GPMR6047)
D Hand or electric drill
D Sealing iron (TOPR2100)
D Heat gun (TOPR2000)
D Hobby saw
D Hobby knife, #11 Blades
D Razor plane (Master Airscrew®)
D Pliers (Common and Needle Nose)
D Screwdrivers (Phillips and flat tip)
D T-pins (HCAR5150)
D 60" Retractable Tape Measure (HCAR0478)
D Straightedge with scale
D Masking tape (TOPR8018)
D Sandpaper (coarse, medium, fine grit)
D Easy-Touch" Bar Sander (or similar)
D Plan Protector (GPMR6167)
D Lightweight balsa filler such as Hobbico^ HobbyLite"
(Hobbico HCAR3400)
D 1/4-20 Tap and Drill (GPMR8105)
D IsopropyI rubbing alcohol (70%)
D White body putty (Squadron SQUR1500)
D Ballpoint pen
D 90° Building square (HCAR0480)
D Micro balloons (TOPR1090)
D Canopy glue
D Drill bits 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",
3/16", 13/64", 1/4", 5/16", 3/8"
D Builders triangle set (HCAR0480)
Custom sanding blocks can be made from balsa or hardwood
blocks and dowels for sanding difficult to reach spots
Balsa Basswood Plywood
D CA Applicator Tips (HCAR3780)
D Epoxy brushes (GPMR8060)
D Epoxy mixing sticks (GPMR8055)
D CA Debonder (GPMR6039)
D Hot Sock "(TOPR2175)
D Single-edge razor blades (HCAR0312)
D Curved tip canopy scissors for trimming plastic parts
(HCAR0667)
D 4 oz Pro Wood Glue (GPMR6161)
Elev = Elevator
LE = Leading Edge (front)
Ply = Plywood
TE = Trailing Edge (rear)
Fuse = Fuselage
LG = Landing Gear
Stab = Stabilizer
" = Inches
4