Ordering replacement parts – Great Planes U-Can-Do 3D 60 ARF - GPMA1270 User Manual

Page 6

To order replacement parts for the Great Planes U-CAN-DO 3D ARF, use the order numbers in the Replacement Parts
List that follows. Replacement parts are available only as listed. Not all parts are available separately (an aileron cannot
be purchased separately, but is only available with the wing kit). Replacement parts are not available from Product
Support, but can be purchased from hobby shops or mail order/Internet order firms. Hardware items (screws, nuts, bolts)
are also available from these outlets. If you need assistance locating a dealer to purchase parts, visit
www.greatplanes.com and click on “Where to Buy.” If this kit is missing parts, contact Product Support.

Replacement Parts List

Order Number

Description

How to Purchase

Missing pieces ................................................Contact Product Support
Instruction manual...........................................Contact Product Support
Full-size plans .................................................Not available
Kit parts listed below.......................................Hobby Supplier

GPMA2300 ...........Wing Kit (one piece wing, ailerons, dowels and hinge material)
GPMA2301 ...........Fuselage Kit (Fuse, belly pan, (2) balsa tank holders, stab fillet, (4) cowl

mounting blocks and servo tray)

GPMA2302 ...........Tail Set (stab, elevators, fin, rudder and hinge material)
GPMA2303 ...........Landing Gear
GPMA2304 ...........Fiberglass Cowl
GPMA2305 ...........Canopy
GPMA2306 ...........Wheel Pants (left and right wheel pant, (4) mounting plates)
GPMA2307 ...........Decal Sheet
GPMA2308 ...........Tailwheel Assembly (tail gear and tail wheel)

ORDERING REPLACEMENT PARTS

100 110 120 130 140 150 160 170 180

Inch Scale

Metric Scale

To convert inches to millimeters, multiply inches by 25.4

1/64" = .4mm
1/32" = .8mm
1/16" = 1.6mm
3/32" = 2.4mm

1/8" = 3.2mm

5/32" = 4mm

3/16" = 4.8mm

1/4" = 6.4mm
3/8" = 9.5mm
1/2" = 12.7mm
5/8" = 15.9mm
3/4" = 19mm

1" = 25.4mm
2" = 50.8mm
3" = 76.2mm
6" = 152.4mm

12" = 304.8mm
15" = 381mm

18" = 457.2mm
21" = 533.4mm
24" = 609.6mm
30" = 762mm
36" = 914.4mm

Metric Conversions