Grant Instruments XUB Series - Manual (Page 4)

XUB Series 29666 V1
Operating Manual
2
Safety instructions
Use of products
The following products are covered by this operating manual:
 XUB5, XUB10, XUB12, XUB18, XUB25
The products listed above are a series of general purpose ultrasonic cleaning baths
designed for indoor use by a professional user.
Electrical
Connect to a 230VAC fully earthed supply via a 3pin plug.
It can be dangerous to operate an ultrasonic bath without an earth connected.
The mains plug is fitted with a 5A fuse. NEVER FIT A FUSE OF A HIGHER RATING.
Ensure that excess mains cable is stored neatly.
General use
Ensure that the bath contains liquid before you switch it on.
Always use a basket to support items to be cleaned.
Not doing so may damage the bath and invalidate your warranty.
Do not place hands or fingers in the bath.
Care should be taken when operating the bath at higher temperatures as external
surfaces may become hot.
Never use toxic, flammable, acidic, caustic or corrosive solutions in the bath.
Avoid moving the bath when it is full of water.
Read the whole of these instructions. Safety may be impaired if they are not followed.
Contact Grant or its agent for advice on cleaning techniques or detergents.
Grant will not be responsible for damage or injury caused by incorrect use of the
equipment.