Maintenance, Returning equipment to grant – Grant Instruments XUB Series User Manual
Page 28
XUB Series
29666 V1
Operating Manual
26
Maintenance
It is important to keep your bath clean. Not only will contaminated liquid reduce the
performance of the bath, it may also damage it. Change the cleaning liquid regularly.
Your cleaning process will determine how often to change the liquid – the more soiled
your items, the more often you will need to change the liquid. Change the cleaning
liquid at least daily.
The base of the bath generates the ultrasonic activity by vibrating at very high speeds.
If any contaminants are in contact with the bath, they act as an abrasive, causing wear
on the metal surface. In extreme cases, the bath will develop holes and start to leak.
portable appliance testing should be conducted with water in the bath.
There are no user serviceable parts inside. All service and repair should be referred to
qualified Grant engineers only
Service contracts for your Grant digital ultrasonic bath are available from Grant.
Returning equipment to Grant
All equipment being returned to Grant for service, repair or other reason MUST BE
FULLY DECONTAMINATED prior to return and include a certificate of
decontamination.
Failure to do so may result in additional charges or the equipment being returned to
the user/sender at Grant‟s discretion.
Ultrasonic baths which have been used in medical/healthcare applications should be
decontaminated/packaged in accordance with MHRA guideline document DB2003(5)
„Management of Medical Devices prior to Repair, Service or Investigation‟. This can
be found
This policy is designed to protect the health and safety of Grant employees, reducing
the risk of potential injury or infection.
More information on decontamination guidelines, as well as copies of decontamination
certificates can be found
If you require further information, please contact the
Grant Service Department
Grant Instruments (Cambridge) Ltd
Shepreth, Cambridgeshire
SG8 6GB
UK
Tel: +44 (0) 1763 260 811
Fax: +44 (0) 1763 262 410
E-mail: