GME TX6200 - Manual (Page 26)

PAGE 26 I N S T R U C T I O N M A N UA L TX6200
SQL-3: minimum sensitivity.
The squelch will open on reasonably
strong signals and weak signals
will not be heard. Suitable for inner
city applications or areas of severe
interference.
CTCSS SETTINGS MENU
OPTION
Use the CTCSS Menu option to set the
required CTCSS tone or to disable the
CTCSS function.
• To enable CTCSS and set the CTCSS
tone, select a number from 01 to 50
that matches the required tone in the
table provided in the CTCSS section
of this manual.
• To disable CTCSS on the radio, set the
CTCSS to oF.
SIGNAL METER
DISPLAY MENU OPTION
The signal meter display is factory set
to display the signal strength of the
incoming signal. However it can also
be set to display other options. The
following options are available.
On CB Channels 1 – 80:
• oFF – The Signal Meter display is
turned off. Nothing will be displayed in
the signal meter area.
• bATT – The battery charge level is
displayed in Volts in the Signal Meter
area.
• S-MET – Incoming signal levels are
displayed in the Signal Meter area.
On User ‘Receive Only’
Channels 81 – 99:
• oFF – The Signal Meter Display is
turned off. Nothing will be displayed
in the signal meter area.
• bATT – The battery charge level is
displayed in Volts in the Signal
Meter area.
• S-MET – Incoming signal levels are
displayed in the Signal Meter area.
• FREQ – The ‘Receive Only’ channel
frequency is displayed in the Signal
Meter area.
CTCSS is disabled
CTCSS is enabled and
set to tone 15 (107.2 Hz)
Indicates 7.9 Volts
Battery Voltage Display