GME TX6500S - Manual (Page 32)

3 2 I N S T R U C T I O N M A N UA L T X 6 5 0 0 S
RECEIVE (RX) ONLY CHANNELS
The TX6500S supports up to 95 user programmable Receive-only channels with frequencies in the
range 403 – 520 MHz. Frequencies can be stored in 5 separate channel banks labelled A to E, each
containing up to 19 channels. These additional 19 channels are located directly above CB channel 80
(81 – 99). Each Receive-only channel can also be assigned an Alpha label to help identify that channel
when it is selected. Frequency programming and channel bank selections are accessed through the
configuration Menu.
Selecting channel banks
Before programming or recalling channels you should select the required channel bank. The 5 channel
banks can be enabled through the Menu either as individual banks of 19 channels (RX-A, RX-B, RX-C,
RX-D or RX-E) or as a combined group of 95 channels (RXA-E). The default channel bank is RX-A.
To select any channel bank
1. Press and hold the key until a high beep will be heard.
2. Press the key repeatedly until ‘RX-x’ is displayed where ‘x’ is a channel bank labelled A, B, C,
D or E.
3. Press the key to step upwards through the channel banks. Select RX-A through RX-E to enable
one of the 5 single channel banks of 19 channels. Select RXA-E to enable all channel banks as a
combined group of 95 channels.
4. Press the key to step back downwards through the channel banks.
5. When finished, press the PTT to exit the Menu.
Using channel banks
When using individual channel banks RX-A to RX-E, each channel bank is enabled separately to provide
19 channels of Receive-only frequencies in each bank. Channels are numbered from 81 to 99.
SEPARATE CHANNEL BANK
RX-A RX-B RX-C RX-D RX-E
81 81 81 81 81
82 82 82 82 82
83 83 83 83 83
84 84 84 84 84
85 85 85 85 85
86 86 86 86 86
87 87 87 87 87
88 88 88 88 88
89 89 89 89 89
90 90 90 90 90
91 91 91 91 91
92 92 92 92 92
93 93 93 93 93
94 94 94 94 94
95 95 95 95 95
96 96 96 96 96
97 97 97 97 97
98 98 98 98 98
99 99 99 99 99
RX ONLY C
H
ANNELS
45315-1_TX6500s_IM.indd 32 11/09/13 4:34 PM