Citizen Systems PD-22 - Manual (Page 32)

32
Optional AC Adaptor Kit
Installing the Battery Adaptor
Batter Battery adaptor y adaptor Battery adaptor
Align
1
2
1
Remove the battery cover from the printer.
(Remove batteries if there are any loaded.)
2
Push in the battery adaptor as shown in the figure.
3
Connect the AC adaptor cord.
4
Attach the battery adaptor cover.
Notes:
• This kit is for use with this printer only. You cannot use it with other products.
• Be sure to insert the battery adaptor before connecting the AC adaptor.
• When the AC adaptor is connected, there is voltage at the battery adaptor’s terminals.
Do not create a short between the two terminals.
• When using batteries, be sure to use the original battery cover.
Notes:
• Do not create a short between the
twoterminals.
• Be careful not to insert incorrectly.