Citizen Systems PD-22 - Manual (Page 15)

15
-
8
7
5
4
9
0
6
1
2
3
External Appearance and Part Descriptions
Error Indication Table
Type of Error POWER LED (Green) ERROR LED (Red)
Batteries running low OFF
No paper (used up) ON
ON
ON
ON
Offline after paper loaded* 1
Printhead overheated
Paper feed motor overheated
Black mark (p. 17) not detected
Roll paper cover open
ON
ON ON
Hardware error OFF
OFF
Time Axis
ON
ON,
OFF
OFF OFF ON
ON
ON OFF OFF
ON ON OFF OFF
ON ON OFF OFF ON
ON
ON OFF OFF
1 POWER LED (POWER: Green)
The green indicator lights up when the power button ( ) is pressed continuously for
2 to 3 seconds.
Additionally, the indicator blinks according to the printer mode (refer to the Error
Indication Table). The indicator blinks more slowly when the batteries are running low.
Replace the batteries when this occurs.
2 ERROR LED (ERROR: Red)
The red indicator lights or blinks when the printer is unable to print because of the
following conditions.
*1: Indicated only when the printer’s internal “Offline status at reloading paper” setting (p. 29) is
set to “Enable”