Citizen Systems PD-22 - Manual (Page 16)

16
3 Optical Receiver
Receives printing data through infrared transmission.
4 Serial Port
Connect the optional RS-232C cable here when using the cable for printing.
5 POWER Button( )
Turns the printer’s power on and off.
To turn on the power, press this button continuously (2 to 3 seconds) until the power
LED lights up.
6 FEED Button (Paper Feed/Clear Error)
The paper is fed while this button is held down. The feeder does not operate unless
the paper is set in the printer.
7 Cover Open Button
Slide this button to open the cover. Close the cover after loading a roll paper.
8 Paper Check Window
Use to confirm that paper is loaded in the printer.
9 Cut Sheet Insertion Slot
Insert single sheets (cut sheets) of paper here.
0 Paper Exit Slot/Paper Cutter
The printed paper exits from the printer here. The slot includes a cutter (tear bar),
which is used to cut the paper from the roll after printing.
- Roll Paper Cover
Open the cover to load a roll paper. Close the cover after the paper is loaded.
External Appearance and Part Descriptions