beautypg.com

Dic operation and displays (without dic buttons), Dic operation and displays, Without dic buttons) – GMC 2007 Acadia User Manual

Page 239

background image

FUEL USED

Press the trip/fuel button until FUEL USED
displays. This display shows the number of
gallons (gal) or liters (L) of fuel used since the
last reset of this menu item. To reset the fuel
used information, press and hold the set/reset
button while FUEL USED is displayed.

AVG (Average) SPEED

Press the trip/fuel button until AVG SPEED
displays. This display shows the average
speed of the vehicle in miles per hour (mph)
or kilometers per hour (km/h). This average is
calculated based on the various vehicle speeds
recorded since the last reset of this value.
To reset the value to zero, press and hold the
set/reset button.

Blank Display

This display shows no information.

DIC Operation and Displays
(Without DIC Buttons)

If your vehicle does not have DIC buttons, the
information below explains the operation of
this system.

The DIC has different displays which can be
accessed by pressing the trip odometer reset stem
located on the instrument panel cluster. Pressing
the trip odometer reset stem will also turn off,
or acknowledge, DIC messages.

The DIC displays trip and vehicle system
information, and warning messages if a system
problem is detected.

If your vehicle does not have DIC buttons, you
can use the trip odometer reset stem to view the
following displays: odometer, trip odometers,
oil life, park assist menu for vehicles with
the Ultrasonic Rear Parking Assist (URPA) system,
Tire Pressure Monitor (TPM) system programming,
Remote Keyless Entry (RKE) transmitter
programming, units, and display language.

239