beautypg.com

Pass-key® iii, Pass-key, Testing the alarm – GMC 2007 Acadia User Manual

Page 120

background image

Testing the Alarm

To test the alarm:

1. From inside the vehicle, lower the driver’s

window and open the driver’s door.

2. Activate the system by locking the doors with

the RKE transmitter.

3. Get out of the vehicle, close the door and wait

for the security light to go out.

4. Then reach in through the window, unlock the

door with the manual door lock and open the
door. This should set off the alarm.

If the alarm does not sound when it should, but the
vehicle’s headlamps flash, check to see if the horn
works. The horn fuse may be blown. To replace the
fuse, see Fuses and Circuit Breakers on page 490.
If the alarm does not sound or the vehicle’s
headlamps do not flash, see your dealer/retailer for
service.

PASS-Key

®

III+

The PASS-Key

®

III+ system operates on a radio

frequency subject to Federal Communications
Commission (FCC) Rules and with Industry
Canada.

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may
cause undesired operation.

This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:

1. This device may not cause interference.

2. This device must accept any interference

received, including interference that may
cause undesired operation of the device.

120