Galaxy Audio AS-1000 - Manual (Page 14)

11
TROUBLESHOOTING
Problem Solution
No Sound
l Make sure both the transmitter and receiver are switched
on and receiving power.
l Make sure the transmitter and receiver are tuned to the
same frequency program number.
l Make sure an audio signal is being supplied to the
transmitter. Check by plugging a set of headphones into
the Phones jack on the transmitter.
l Make sure the receiver is within range of the transmitter.
l Check whether the transmitter is located too near a metal
object, or there are obstructions between the transmitter
and receiver.
Sound
interference
l Check the transmitter antenna location. Higher is better.
l When using 2 or more transmitters simultaneously, make
sure the chosen frequencies are not interfering with each
other.
l Check whether the interference comes from other
wireless systems, TV, radio, etc. Try choosing new
matching frequency program numbers for both the
transmitter and receiver.
Distortion
l Check the input volume control setting on the transmitter.
(See step #7 under Set-up and Operation).
l Make sure the receiver volume is not set too high.
l Make sure the source signal supplied to the transmitter is
not distorted.
AS-1000