Galaxy Audio ECD - Manual (Page 7)

5
Tips for Improving System Performance Tips for Improving System Performance
Issue Indicator Status Solution
Trouble Shooting
Not Transmitting Turn on transmitter,
Make sure the +/- indicator on the batteries
match the transmitter terminals
Not Receiving Make sure the AC adapter is securely
plugged into electrical outlet and into
DC input connector on rear panel of receiver.
Receiver RF indicator glows Turn up the receiver’s Audio Output level
Control up, adjust the Gain switch on the
transmitter, Check the power connection of
the receiver and amplifier or mixer
Receiver RF indicator off,
transmitter on Move the receiver away from metal objects,
Check whether there is an obstruction
between receiver and transmitter,
Move the transmitter near the receiver,
Re-Sync receiver and transmitter
to the same frequency
The battery power indicator
light flashes or turns RED Change the batteries the in transmitter
Distortion or unwanted
noise bursts Receiver display indicates
RF/AF Remove nearby sources of RF inter-
ference (CD players, computers, digital
effects, in-ear monitor systems, etc.)
Distortion level
increases gradually
Sound level different
from cabled guitar or
microphone, or when
using different guitars Adjust transmitter gain and receiver
volume as necessary
Transmitter power indicator
light flashing Replace transmitter batteries
Maintain a line of sight between transmitter and antenna.
Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computes, etc)
Keep the receiver away from the wall and over 3ft. from the ground
Cellular telephones, two-way radios and other RF sources can interfere with the transmitting
frequencies. Maintain the greatest distance possible from the interfering equipment to minimize
interference.
No sound or faint
sound