Galaxy Audio CTS - Manual (Page 17)

Issue Indicator Status Solution
Troubleshooting
Transmitter ON Indicator
stop flashing Turn on transmitter.
Make sure the +/- indicator on battery
match the transmitter terminals
Power indicator off Make sure AC adapter is securely
plugged into electrical outlet and into
DC input connector on rear panel of
receiver.
Receiver RF indicator glows Turn the receiver up
Turn up the Gain adjustment switch in
the transmitter
Check the power connection of the
receiver and amplifier or mixer
Receiver RF indicator off,
transmitter indicator ON Take the receiver away from the metal
objects
Check whether there are obstructions
between receiver and transmitter
Move the transmitter near the receiver
Check the receiver and transmitter
whether use the same frequency
Transmitter low battery
indicator ON Change the batteries in transmitter.
Distortion or
unwanted noise
bursts. Receiver RF indicator ON Remove nearby sources of RF inter-
ference (CD players, computers,
in-ear monitor systems, etc.)
Distortion level
increases gradually.
Sound level different
from cabled guitar or
microphone, or when
using different guitars. Adjust Transmitter Gain and Receiver
Volume as necessary.
Transmitter low battery
indicator ON Replace Transmitter batteries.
Maintain a line of sight between transmitter and antenna.
Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computers, etc).
Keep the receiver away from the wall and over 1m to the ground.
Cellular telephones, two-way radios and other RF transmitters can interfere with the transmitting
frequencies, maintain a distance from interfering equipment.
Tips for Improving System Performance
No sound or faint
sound.
Troubleshooting Troubleshooting
15